The design considerations of Dosing Mixer
The vertical dosing mixer is mainly used in sewage and sludge treatment and chemical reaction kettle stirring.


You need to set the purpose of mixing before choosing a mixer.If liquid-liquid mixing, solid-liquid suspension, gas-liquid or liquid-liquid dispersion, whether need to achieve heat transfer, absorption, extraction, dissolution, crystallization and other technological purposes.The operator can choose the form of the mixing paddle according to the technological characteristics. The power of calculating the mixing process is the power of the mixing process.Select motor power: taking into account the calculation efficiency after the value should be greater than or equal to 1.5 times the mixing operation to power.The minimum critical rotating speed of the identified: the revolution is to meet the agitation to the lowest possible speed instead of stirring shaft critical speed.According to the power selection and check the stiffness and strength of the mixing shaft and propeller.Equipped with speed reducer should also be considered when the bearing capacity coefficient using speed reducer and reducer.For the slender shaft should be considered to increase the support, middle or bottom support, but also consider the way to install.
Actually not only dosing mixer has the design considerations, some other devices also have the corresponding design considerations.And the attention of different devices are different, matters needing attention are according to the characteristics of the equipment and appear. Welcome you to contact Changzhou City Bo Neng reducer CO.LTD. to negotiate business.
|