What are the components of the dosing mixer?Driving part, we take the most common pin gear reducer as an example,As is shown above,Mixer is mainly composed of four parts,cycloidal reducer motor, deceleration machine, the stirring shaft and the impeller.What are the main functions of each part, we have to specify the following.
  Motor is what we often say motor, to provide power for the mixer, drive mixing shaft and propeller rotation.Motor power is mainly based on the working time of the reducer, mixing material to choose, need to pay attention to the power can not be selected, because it will cause the mixer can not work or damage.
  The function of the reducer is to reduce the input speed, so that the speed can reach the required range.Speed according to the mixing media, speed ratio, coefficient and other requirements to match.General in the actual use can not adjust speed again, because the speed reducer factory after the power of the motor speed and gear ratio is fixed, unless the use of variable frequency motor.
  Stirring shaft and the impeller can be selected according to the acid, alkaline, density of mixing medium of different material, size and shape.Material general carbon steel, 304 stainless steel, carbon steel lining plastic, 316L stainless steel, higher requirements can also be PTFE coated with titanium and stainless steel.The common have a paddle on the impeller shape, pusher, turbine, frame anchor type, screw type.The application range of dosing mixer is very wide, we will according to the specific situations to help customers select suitable mixer.(Contact us to know more, alibaba's flagship store)