Procurement unit in choosing a blender first must know your need is kind, and then corresponding to find, don't do it useless.
    First is anchor agitator, blade edge shape and agitation tank wall should agree, in which only a small gap, can remove attached to the tank wall viscous reaction product or solid accumulation on the bottom of the channel, keep good heat transfer effect. Circumferential speed of the outside of the blade is 0.5 ~ 1.5 m/s, can be used for mixing type 200 pa s. Newton fluid viscosity, anchor agitator and pseudoplastic fluid. Only mixing high viscosity liquid, the liquid layer has large dead zone (more common).

    The second is turbine agitator, by in horizontal disc installed on 2 ~ 4 piece of flat or curved blade. Turbine agitator (15) of the blade outside diameter, the ratio of width and height, is commonly 20:5:4, circumferential velocity is commonly 3 ~ 8 m/s. While rotating turbine highly turbulent radial flow, suitable for gas and not miscibility liquid and liquid, liquid phase reaction process. By mixing the viscosity of the liquid is generally not more than 25 pa s..
    The third is the folding vane stirrer according to the physics properties of different media, capacity, and select the blender mixing purpose, to promote chemical reaction speed, improve the efficiency of production can play a big role. Folding blade turbine agitator generally suitable for gas, liquid phase mixing reaction, agitator revolutions usually should choose more than 300 r/min.