Now with the gradual development of science and technology, mixer began to be applied in more and more industry, just as its name implies, we use the mixer is mainly used for mixing materials, but different mixer which method to use is not the same. In the following, please follow the small series with the view of bullish function mixer to use, I hope to help you.

    When we will just buy back the machine when it's ready to be put into use more careful, need through to external power, when used on the power switch, then can see indicator; Then mix with solution and try bottles on the roof, a magnetic stirring switch, the corresponding indicator light will be bright; There is need to adjust, calibration machine and jig on the pillar position and height of the clamping, Open the electric switch, the corresponding indicator; Set temperature, temperature measurement selection switch to set the place, conditioning temperature control knob, figures show the set temperature, set temperature, temperature measurement selection switch to the temperature measurement, digital solution temperature in the practice, wait for the multi-function mixer used after completion of the speed control knob on the minimum position, temperature control knob in a non-working state, stir the switch and the power switch, cut off power supply, then the pillar and working face, clamp, sensors, wipe clean, cannot have above residual water and dirt. The whole process of a set of down is the correct way of using the multi-function mixer, if we are to each use of the machine can be so careful, the life of the mixer is taking longer than expected.
    That is to introduce the use method of multi-function mixer, if you buy a multi-function mixer, can try to be carried out in accordance with the above method to operate, if you have other questions or comments, welcome to call our hotline for consultation!