Changzhou Boneng deceleration Machinery Co., Ltd. is located in Jiangsu Changzhou District of Wujin economic area, mature technology, convenient transportation. Our company specializing in the production of environmental protection equipment reducer, dosing mixer, sewage mixer, dosing equipment, large sewage mixer (center of scraping mud machine, sludge mixer, hyperbolic surface stirring, grille). According to our many years of experience, summed up the mixer selection of several methods.
    First, according to the viscosity of the mixing medium to choose, and according to the size of the viscosity to calculate the size of the size of the agitator. Agitator were with and low viscosity and different scope of use, with the increase of the viscosity of the agitator selection order are: to promote turbine impellers anchored / box type screw belt type etc..
    Then, according to the purpose of the stirring process and the flow state caused by the agitator. This type selection method is divided into fast and slow mixer. The utility model is suitable for the runoff state, and the slow type is suitable for the laminar flow state. According to the stirring purpose and flow condition, the condition of paddle type and baffle is determined, and the flow condition is decided by the viscosity of the mixing medium. Low viscosity of homogeneous liquid mixture. Most suitable for is propelled, promote the circulation and little power consumption, and turbine agitator although high cutting capability, but its power consumption is large, so for this mixing process is not necessary. Because of its simple structure, paddle agitator is still widely used in small volume liquid mixing, but it can be used in large volume liquid mixing.

    The dispersion process, turbine agitator with high shear strength and greater circulation ability, so the combination of. Because of its shear force than the straight blade vortex small, so only in the case of a smaller amount of liquid dispersion. The range of use of a solid suspension in a vortex mixer is maximum. The paddle type velocity is low, which is suitable for solid suspension with small solid particle size, low solid density difference, high solid concentration and low settling velocity. It is not suitable for the propulsion mixer in the solid-liquid density difference or the solid-liquid ratio at 50% or more. The solid dissolution process requires that the mixer has a shear flow and circulation capability, so the turbine type is the most suitable one. The pushing type circulation ability is big but the shear flow is small, so it is reasonable to dissolve the small capacity. Paddle type to enhance the circulation of the use of baffles, generally in the easy to suspend the use of dissolved operations. The gas absorption process is the most suitable for the disc turbine, its shear force is strong, and below the disc can save some gas, so that the dispersion of the gas more stable.
    More than is to introduce you about agitator selection, if you have any questions. Welcome to call our hotline.